Saab 9-5 + Saab 9-5 Cars + Governing bodies and operation receptions + Settings and routine maintenance of the car + Engine + Systems of cooling of the engine, heating, ventilation and air conditioning - Power supply system and production of the fulfilled gases General information and security measures Sbrasyvaniye of pressure in fuel system + Power supply system of petrol engines + Power supply system of the diesel V6 engine + Systems of release and decrease in toxicity of the fulfilled gases + Systems of electric equipment of the engine + Manual box of gear shifting + Automatic transmission + Coupling and power shafts + Brake system + Suspension bracket and steering + Body + Onboard electric equipment
|
Power supply system and production of the fulfilled gases
Specifications
Power supply system type |
Petrol engines |
Direct injection (distributed, consecutive), under control of ECM, with a turbo-supercharging and an interkuler |
Diesel engine |
Direct injection with the distributive highway («Common rail») and electronic control with a turbo-supercharging and an interkuler |
Axial люфт shaft of a turbokompressor, mm |
0.036 ÷ 0.091 |
Petrol engines
Dependence of target tension of the sensor of pressure of EVAP system on pressure
Supported pressure in a power supply system, atm |
3.0 ± 0.1
|
Pressure in a power supply system in 20 minutes after switching off of the engine, atm |
not less than 2.3
|
Resistance of the sensor of a stock of fuel at empty//a full tank, Ohm |
|
50 ± 1.5//425 ± 6.5
|
|
60 ± 2.6//390 ± 6.0
|
Productivity of the fuel pump at 3.0 atm, l/mines |
not less than 1.4
|
Volume of the fuel filter, l |
0.6
|
Type of injectors |
Bosch EV6 E, with 4 nozzles
|
|
brown color
|
|
dark blue color
|
Resistance of an injector, Ohm |
15.95 ± 0.4
|
Fuel stream through injectors of 4-//6-cylinder engines, ml/30 with |
176 ± 7//109 ± 4
|
Admissible difference of streams of fuel through injectors of 4-//6-cylinder engines, ml |
14/8 8
|
Pump SAI type |
Borg Warner 800-T2
|
Productivity of the pump SAI, kg/h |
not less than 30 absorptions at pressure of 0.1 atm
|
The current consumed by the pump SAI at work//start-up, And, no more |
30/120
|
Pressure of pressurization of a turbokompressor, atm of ± 0.03 atm |
|
0.40
|
- Mitsubishi TD04HL-15T compressor
|
0.45
|
Type lambda probes of 4-cylinder engines |
Bosch LSF 4.7 with electroheating
|
Heater capacity lambda probe of 4-cylinder engines, W |
7
|
Control range of tension a lambda probe of 4-cylinder engines, In |
0 ÷ 1
|
Resistance of a heater lambda probe, Ohm |
9
|
Resistance of the valve of a purge of an adsorber of EVAP, Ohm |
45 ± 5
|
Resistance kontrolno the valve of the closed tank (EVAP), Ohm |
24.5 ± 1.5
|
Dependence of target tension of the sensor of pressure of EVAP on pressure |
Pressure, kPa |
Tension, In
|
|
0.5
|
|
3.5
|
|
4.5
|
Diesel engines
Dependence of target tension of the MAF sensor on an air stream |
Air stream of kg/h |
Tension, In
|
|
2.27
|
|
2.77
|
|
3.16
|
|
3.42
|
|
3.66
|
|
3.86
|
|
4.04
|
|
4.20
|
|
4.36
|
|
4.49
|
Resistance of the sensor of a stock of fuel at empty//a full tank, Ohm |
60 ± 2.6//390 ± 6.0
|
Maximum pressure of TNVD fuel, atm |
1000
|
Soaking-up pressure of TNVD, atm |
no more than 0.2
|
Antipressure on the returnable party of TNVD, atm |
no more than 1.0
|
Returnable stream of fuel on turns X/x//on the maximum turns, l/mines |
0.83/2.50
|
Maximum capacity of a heater of the fuel filter, W |
165
|
Fuel temperature at inclusion//switching off of a heater of the fuel filter, a hail. |
0/20
|
Pressure of fuel in nozzles, atm |
1650
|
Quantity/diameter the mm snuffled nozzles, |
7/0.15
|
Nominal resistance of a potentiometer of a pedal of gas, Ohm of ± 35 % |
|
900 ÷ 1400
|
|
1200 ÷ 2000
|
Pressure of pressurization of a turbokompressor (Garret VNT), atm |
1.0
|
Efforts of a tightening of carving connections, N • m
Plastic screw of a jellied mouth of a fuel tank |
1.5
|
Fixture of a perepuskny tube |
8
|
Fixture of forward and back sections of final system |
22
|
Fixture of the fan of a radiator |
8
|
Fixture of the inlet pipeline to an U-shaped collar of a head of cylinders of V6 engines |
14
|
Bolts М6 of fastening of a target oil tube to a turbokompressor |
14
|
Hollow bolt of fastening of a submitting oil tube of a turbokompressor to the case of the oil filter |
- 4-cylinder petrol engines
|
25
|
|
20
|
Hollow bolt of fastening of a submitting oil tube to a turbokompressor |
20
|
Collar of the back exhaust silencer |
70
|
Collar of an inlet pipe of an interkuler |
8
|
Lambda probe |
55
|
Fixture of an arm of a turbokompressor to the block of cylinders |
24
|
Turbokompressor fixture to forward section of final system |
|
24
|
|
22
|
Fixture of a tube of cooling of a turbokompressor |
- To the water pump (a hollow bolt)
|
20
|
- To a turbokompressor (a hollow bolt)
|
25
|
- To a head of cylinders of V6 engines
|
14
|
Hollow bolts of a returnable tube of cooling of a turbokompressor |
25
|
Fixture of a joint of final collectors of V6 engines |
40
|
Nut of the thermofilter of V6 engines |
24
|
Hairpin of fastening of the thermofilter of V6 engines |
22
|
Petrol engines
Collars of a hose of a jellied mouth of a fuel tank |
4.1
|
Hollow bolt of the fuel filter |
21
|
Screw ring of the fuel filter |
75
|
Fixture of the fuel distributive highway of the V6 engine |
8
|
Fixture of the top section of the inlet pipeline of the V6 engine |
20
|
Fixture of an interkuler |
8
|
Hollow bolt of fastening of a tube of ventilation of a case to an inlet tube |
24
|
Fixture of final collectors to heads of cylinders |
|
20
|
|
25
|
Fixture of a final collector to a turbokompressor of 4-cylinder engines |
|
24
|
|
22
|
Lock-nut of the thermofilter of 4-cylinder engines |
20
|
Pump GUR arm |
24
|
Hollow bolt of fastening of a tube of cooling of a turbokompressor to the water pump |
20
|
Fixture of an arm of a turbokompressor to the block of cylinders |
24
|
Fixture of a pedal of gas |
24
|
Diesel engine
Bolts М8 of fastening top//bottom section of the inlet pipeline |
21/31 |
Fixture of the fuel distributive highway |
25 |
Adjusting bolt of TNVD |
21 |
Fixture of a submitting tube to TNVD |
25 |
Fixture of a submitting tube of TNVD to an arm |
35 |
Hollow bolts of fuel lines |
20 |
Bolt of fastening of a pulley of TNVD |
160 |
Fixture of the fuel distributive highway |
25 |
Screw ring of the sensor of a stock of fuel |
75 |
Sensor of temperature of fuel |
23 |
Fixture of final collectors to heads of cylinders |
20 |
Hollow bolt of fastening of a tube of cooling of a turbokompressor to the water pump |
24 |
Fixture of a potentiometer of a pedal of gas |
20 |
Fixture of connections of exhaust pipes |
30 |
Valve of management of pressure of pressurization |
4 |
Fixture of an arm of a final collector |
25 |
MAP sensor fixture to the inlet pipeline |
8 |
Turbokompressor fixture |
30 |
|
|