Saab 9-5

since 1997 of release

Repair and car operation

Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
- Settings and routine maintenance of the car
   General information
   General information about settings and adjustments
   Schedule of routine maintenance
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure of their rating
   Replacement of impellent oil and oil filter
   Check of effort of a tightening of fixture of elements of a suspension bracket
   Adjustment of headlights
   Check of brake system
   Replacement of brake liquid, pumping of brake system
   Check of a condition of the battery and care of it
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of CV JOINTS of power shafts
   Check of a condition of system of production of the fulfilled gases
   Check of a condition and replacement of hoses and tubes in an impellent compartment, localization of leaks
   Check of a condition and tension of a belt of a drive of auxiliary units
   Check and replacement of the salonny filter of a heater and To/in
   Service of locks and loops
   Check of elements of systems of safety
   Replacement of a filtering element of an air purifier
   Check and replacement of spark plugs and ignition module
   Replacement of the fuel filter
   AT liquid replacement
   Condition check, adjustment and replacement of brushes of screen wipers
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Settings and routine maintenance of the car

Specifications

Limiting thickness of wear of brake shoes, mm

Types and volumes of applied greasings and liquids

Fuel type
Petrol engines	Unleaded gasoline from AI-91 to AI-98
Diesel engines	Diesel fuel
Recommended type of fuel for petrol models
B205E, B235E	АИ 95
B205R, B308E	АИ 98
Volume of a fuel tank, l
B205E, D308L	75
B235E/R, B308E	70
Type of impellent oil	Saab Turbo, or API-SG/SH meeting requirements and ACEA A2-96/A3-96, including CCMC G4/G5 requirement.
Viscosity of impellent oil according to the SAE specification
The all-weather	10W-30, 10W-40 or 15W-40
At continuous operation at temperatures-20 hail is lower	5W-30 or 5W-40
At continuous operation at temperatures the 15th hail is higher	15W-30 or 20W-50
Volume of impellent oil (with the filter), l
B205E, B235E
At replacement	4.0
With a maslookhladitel	5.4
B308E
At replacement	4.5
With a maslookhladitel	5.0
D308L
At replacement	6.8
Without the filter	6.1
For level increase from bottom to the top label on щупе	1.0
RKPP transmission oil type.	Synthetic oil for RKPP Saab (No. 400 108 247)
Volume "(Sukhoi)" of the RKPP transmission oil, l	1.9
Type of transmission oil for AT
AF33-5 (ATF)	Saab 3309 or Dexron III
AF30	Texaco Texamaic Dexron III
Volume of ATF, l
For level increase from bottom to the top label on щупе	0.5
Full (with the hydrotransformer and a maslookhladitel)	7.2
At replacement	3.2
Type of cooling liquid	Original OZh Saab of 50 % of water
Volume of cooling liquid, l
4-cylinder engines	7.4
Petrol V6 engines	7.2
Diesel V6 engines	8.1
Type of brake liquid	DOT 4
Volume of brake liquid, l
In the tank	0.225
Full volume	0.9
GUR liquid type	CHF 11S (No. 30 32 380 according to the Saab catalog)
Full volume of GUR liquid, l	1.3
Type of greasing of CV JOINTS
The internal	Mobile Grease K575GS (No. 30 04 561)
The external	Molycote VN 2461C (No. 87 81 676)
Greasing for drafts of levers of screen wipers	Gleitmo 805 (white konsistentny greasing, No. 30 06 442) or Gleitmo 880 (spray, No. 30 06 582)
Greasing for hinges of levers of screen wipers	Gleitmo 582 (white fat) or Gleitmo 540 (No. 30 08 612)
Greasing for the lock of a cowl, pins and a safety hook	Gleitmo 805
Greasing for the mechanism of the lock of a trunk lid	Liquid getting oil
Greasing for a finger of the coupling device	Molycote 33 (No. 30 20 476)
Greasing for levers of limiters of doors	Gleitmo 880
Greasing for a carving of spark plugs	Molycote 1000 or analog
Greasing for rubber consolidations of the module of ignition	Krytox
Greasing for battery plugs.	Acid-free vaseline (No. 30 06 665)
Spray for cleaning of contacts of sockets of electroconducting	Kontakt 61

Engine

Type of spark plugs//interelectrode gap, mm
B205E, B235E	NGK BCPR 6ES-11//1.0 ÷ 1.1
B205E with special equipment (M01-)	NGK PFR 6H-10//0.9 ÷ 1.0
B235R (225 h.p.)	NGK PFR 7H-10//0.9 ÷ 1.0
B235R (230 h.p.).	NGK PFR 6H-10//0.9 ÷ 1.0
B308E	NGK BKR 7ES-11//1.0 ÷ 1.1
The effort developed by a natyazhitel of a belt of a drive of auxiliary units, N	not less than 170

Tires

Types and speeds (km/h) of operation of used tires
205/65 R15V	to 160
215/55 R16V	to 190
225/45 R17Y	to 190
Spare wheel of T115/70 R16	to 80
Spare wheel of 195/65 R15	to 80
Pressure of a rating of tires (when loading from 1 to 3 people), atm
Except spare wheels	2.2
Spare wheel of T115/70 R16	4.2
Spare wheel of 195/65 R15	2.5

Efforts of a tightening of carving connections, N • m

Bolts of fastening of wheels	110
Drain stopper of impellent oil.	25
Top bolts of fastening of racks of a forward suspension bracket	18
Bolts of fastening of a back stretcher to a body	90 then to hold on on a corner the 60th hail
Bolts of fastening of longitudinal levers of a back suspension bracket to a body.	90 then to hold on on a corner the 30th hail
Spark plugs
B205E, B235E/R	28
B308E	27.1
Fastening of a final hose of AT	27.1

General information

This head was made to help on purpose to the owner of the car to support the vehicle in a condition of the maximum readiness for operation, receiving from it effective return with observance of requirements to profitability and safety.

The schedule of routine maintenance of the car is provided in the Section the Schedule of routine maintenance. Below the sections devoted to a detailed statement of an order of performance of each of procedures of service separately are offered attention of the reader. Descriptions of visual checks, adjustments, procedures of removal and installation of components are included in a material, and also various good advice and recommendations.

Components of a compartment of 4-cylinder engines, subject to regular service


1 — the Cover of a jellied mouth of impellent oil with built in shchupy 2 — the Tank of brake liquid 3 — the Assembly block of the relay and safety locks 4 — the Broad tank of system of cooling 5 — the Tank of liquid of stekloomyvatel	6 — the Storage battery 7 — Shchup of measurement of level of ATF 8 — Turbokompressor 9 — Assembly of coils of ignition 10 — the GUR liquid Tank

Components of a compartment of the petrol V6 engine, subject to regular service


1 — Shchup of measurement of level of impellent oil 2 — the Cover of a jellied mouth of impellent oil 3 — the Tank of brake liquid 4 — the Assembly block of the relay and safety locks 5 — the Broad tank of system of cooling	6 — the Tank of liquid of stekloomyvatel 7 — the Storage battery 8 — Shchup of measurement of level of ATF 9 — Assembly of coils of ignition 10 — the GUR liquid Tank

Components of a compartment of the diesel engine, subject to regular service


1 — To a ryshka of a jellied mouth of impellent oil 2 — the Tank of brake liquid 3 — the Assembly block of the relay and safety locks 4 — the Broad tank of system of cooling	5 — the Tank of liquid of stekloomyvatel 6 — the Storage battery 7 — Shchup of measurement of level of impellent oil 8 — the GUR liquid Tank

Serving the car according to the stipulated kilometrazhno-time schedule, and following the detailed recommendations provided below, the reader will receive the accurate action program which performance will provide long duration and reliability of service of its vehicle. Remember that this program is made on a complex basis and performance only with neglect others will not lead its separate points to desirable result.

Do not forget as well that at operation severe conditions as, for example, at primary operation of the car in a city cycle, frequent movings in the mountain district, towage of the trailer or movement in the conditions of the raised dust content maintenance should be carried out more often.

In the course of service of the car the reader will be convinced that many procedures can, and should, to be united in the general groups in view of similarity of the nature or proximity of an arrangement of knots. For example, if the car for any reason is lifted over the earth, it is necessary to use a case and at the same time to check a condition of components of system of production of the fulfilled gases, a suspension bracket and a steering. Also, having hired a dinamometrichesky key, check effort of a tightening of all available carving fixture. Making rotation of wheels, at the same time estimate a condition of brake mechanisms and wheel bearings.

The first step of service of a vehicle always is self-preparation of the performer. Attentively familiarize with a material of the present chapter, then make the list of components needing attention, prepare the necessary tool and outline the short plan of the forthcoming works. In case of emergence resistant to solution of problems address for the help to specialists of car-care center.