Saab 9-5

since 1997 of release

Repair and car operation



Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   General information, recommendations and security measures
   + Forward suspension bracket
   + Back suspension bracket
   + Steering
   + suspension bracket Geometry
+ Body
+ Onboard electric equipment


.



Suspension bracket and steering

Specifications

Quantity of turns of a steering wheel (from an emphasis against the stop) 2.9
The maximum admissible length of steering draft (between a lock-nut and a groove in draft on a boot), mm 210
Maximum admissible difference of lengths of the left and right steering drafts, mm 7
Greasing of protective covers of steering drafts Shell EP B2, Shell Retinax A or similar
Diameter of a turn, m 11.4
Type and GUR liquid volume see. Specifications to Head of Control and routine maintenance of the car
The maximum pressure (atm)//a stream (cm3) the GUR liquids created by the pump
  • 4-cylinder engines
120/7 7
  • Petrol V6 engines
127/11
  • Diesel V6 engines
127/9 9

Wheels and tires

Type of wheels
  • The established
6J x 15 H2 ET49
  • The spare
4.00B x 16
Maximum admissible radial and axial palpation of cast disks, mm 0.5
Maximum admissible radial//axial palpation of stamped disks, mm 0.6/0.8
Oozes of tires
  • The established
205/65 R15 94V
  • On a spare wheel
T115/70 R16 92M or 195/65 R15V

Corners of installation of wheels, suspension bracket geometry

Height of a lobby and back suspension bracket

Height (mm) of a lobby//a back suspension bracket depending on the size of wheels

15"

600/590

16"

610/605

17"

630/620

17" (sports)

620/610
Disorder of forward wheels depending on their size

15" and 17"

- 0.8 °

16" and 17" (sports)

- 0.9 °
Выбег forward wheels 2.9 ° ± 0.5 °
Corner of a cross-section inclination of an axis of turn of forward wheels 12.6 ° ± 0.5 °
Full convergence of forward wheels depending on their size

15"

0.28 ° ± 0.08 ° (2 ± 0.6 mm)

16" and 17"

0.28 ° ± 0.08 ° (2.2 ± 0.6 mm)

17" (sports)

0.28 ° ± 0.08 ° (2.4 ± 0.6 mm)
Limiting angles of rotation of forward wheels
  • The internal
21.25 ° ± 0.5 °
  • The external
20 °
Disorder of back wheels depending on their size

15"

- 0.9 °

16" and 17"

- 0.8 °

17" (sports)

- 1.1 °
Full convergence of back wheels depending on their size

15"

0.42 ° ± 0.20 ° (3 ± 1.4 mm)

16"

0.42 ° ± 0.20 ° (3.2 ± 1.4 mm)

17"

0.42 ° ± 0.20 ° (3.4 ± 1.4 mm)

Efforts of a tightening of carving connections, N • m

Wheel bolts (М12 x 1.5) 110
Bolts of fastening of the central and back sections of an exhaust pipe 62

Back suspension bracket

Stretcher fixture to a body 90 then to hold on on a corner the 60th hail.
Arm of the longitudinal lever to a body 90 then to hold on on a corner the 30th hail.
The longitudinal lever to an arm 90 then to hold on on a corner the 60th hail.
Cross-section bent for to the longitudinal lever 90 then to hold on on a corner the 60th hail.
Stabilizer fixture 50
Nut of a rod of the shock-absorber 20
Rack fixture to a body 55
Bolt of fastening are resistant to the longitudinal lever 190
Fixture of a back nave to the longitudinal lever of a suspension bracket 50 then to hold on on a corner the 30th hail.

Forward suspension bracket

Stretcher fixture to a body 100 then to hold on on a corner the 45th hail.
Fixture of the back amplifier of a stretcher 65
Nut of a forward nave
  • Models till 2001 вып.
    • Nut without a flute
290
    • Nut with a flute
170 then to hold on on a corner the 45th hail.
  • Models since 2002 вып. (a nut with a flute)
230
Nave assembly to a rotary fist (since 2002 вып.) 90 then to hold on on a corner the 90th hail.
The top bolts of fastening are resistant suspension brackets
  • Models till 2001 вып.
18
  • Models since 2002 вып.
30
Nut of a rod of the shock-absorber 75
Bolts of fastening are resistant suspension brackets to a rotary fist
  • Models till 2001 вып.
110 then to hold on on a corner the 45th hail.
  • Models since 2002 вып.
100 then to hold on on a corner the 90th hail.
Nut of fastening of a rack of the stabilizer 90
Stabilizer fixture to a stretcher 25
Bolt of fastening of a spherical support to a rotary fist
  • Models till 2001 вып.
95
  • Models since 2002 вып.
49
Bolts of fastening of a spherical support to the suspension bracket lever
  • Models till 2001 вып.
20
  • Models since 2002 вып.
20 then to hold on on a corner the 90th hail.
Bolt of fastening of the lever of a suspension bracket to a stretcher
  • Models till 2001 вып.
95
  • Models since 2002 вып.
120 then to hold on on a corner the 90th hail.
Bolt of fastening of the plug of the lever of a suspension bracket to a stretcher 75

Steering

Nut of fastening of a tip of steering bent for to a rotary fist
  • Models till 2001 вып.
60
  • Models since 2002 вып.
35
Lock-nut of steering draft 70
Fixture of the steering mechanism 90
Coupling bolt of the hinge of a steering shaft 30
Fixture of a steering column 25
Fixture of a steering wheel 38
Pump GUR fixture 25
Fixture of lines of GUR liquid 30