Saab 9-5

since 1997 of release

Repair and car operation



Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
- Systems of electric equipment of the engine
   - Systems of ignition, preheat and engine management
      Main data and security measures
      Search of malfunctions - the general information and preliminary checks
      Removal and ECM installation
      Candles and modules of ignition of petrol engines
      Removal and installation of components of system of preheat of the diesel engine
      Removal and installation of sensors of a control system by the engine
   + Diagnostics of systems of electronic control and diagnostic equipment
   + charge and start Systems
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Removal and installation of components of system of preheat of the diesel engine

Module of management of preheat

 PERFORMANCE ORDER

  1. Give nuts (1), separate sockets (2) and remove the module of management of preheat.
  1. Installation is made upside-down.

Glow plugs

 PERFORMANCE ORDER

  1. Remove the top section of the inlet pipeline (see. Section Removal and installation of the inlet pipeline).
  2. Separate sockets of the EGR valve, the sensor of temperature of fuel and the MAP sensor.
  1. Remove submitting fuel tubes of nozzles 1, 3, 4 and 5 (6 on an illustration) and the returnable fuel line (7) of a back row of cylinders together with arms.
  1. Separate sockets of electroconducting of nozzles and remove nozzles.
  1. Installation is made upside-down. Use new laying of the returnable fuel line and new submitting tubes.