Saab 9-5

since 1997 of release

Repair and car operation

Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   General information, recommendations and security measures
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Removal and installation of tips and protective covers of steering drafts
      Removal and installation of the steering mechanism and steering drafts
      Removal and installation of a steering wheel
      Removal and installation of assembly of a steering column
      Removal and pump GUR installation
   + suspension bracket Geometry
+ Body
+ Onboard electric equipment


Removal and installation of tips and protective covers of steering drafts


  1. To Poddomkratta the car also remove a wheel.
  1. Give a lock-nut (3) and a nut (4) fastenings of a tip (6) helmsman of bent for to a rotary fist.
  1. Separate a tip from a rotary fist by means of the special adaptation.
  2. Turn out a tip from steering draft, counting up quantity of turns.
  3. Clear area round a protective cover of steering draft and remove it.
  4. New cover grease with Shell EP B2 greasing and fix new collars.
  5. Installation is made upside-down. Navorachivayte a tip on draft on the quantity of turns defined at its removal.

The right and left tips differ from each other and should be established on the relevant parties of the car.