Saab 9-5

since 1997 of release

Repair and car operation



Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
- Power supply system and production of the fulfilled gases
   General information and security measures
   Sbrasyvaniye of pressure in fuel system
   + Power supply system of petrol engines
   + Power supply system of the diesel V6 engine
   - Systems of release and decrease in toxicity of the fulfilled gases
      General information
      Removal and installation of components of system of release of OG
      Removal and installation lambda probes
      Removal and installation of components of SAI system
      Removal and installation of components of EVAP system
      Removal and installation of the valve and EGR system tube
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Removal and installation of components of EVAP system

Pressure sensor паров fuels

 PERFORMANCE ORDER

  1. Remove a fuel tank and clear area round the pressure sensor the compressed air.
  1. Turn out the screw of fastening of the sensor, disconnect from it electroconducting and remove the sensor.
  1. Installation is made upside-down. Previously make sure of purity of interfaced surfaces and grease a sealing ring of the sensor with acid-free vaseline.

Adsorber

 PERFORMANCE ORDER

  1. Remove a fuel tank.
  1. Disconnect from an adsorber the line of a purge and a hose of the valve of an otsechka (2 on an illustration).
  1. Disconnect lines from a fuel tank to an absorber (3 on an illustration). For this purpose at first press the socket in the direction to an absorber (a), then compress pads of a clamp (b) and disconnect a hose (c).
  2. By means of the special adaptation weaken a hose of a purge of an adsorber.
  3. Give fixture (5 on an illustration) and remove an adsorber.
  4. Installation is made upside-down. Watch correctness and reliability of connection of hoses.

Otsechka valve

 PERFORMANCE ORDER

  1. To Poddomkratta the car, cut a cable coupler (2 on an illustration), separate and remove the socket (3) devices of a purge.
  1. By means of a screw-driver disconnect the purge device from an arm of a jellied tube (4 on an illustration). Clear the purge device.
  2. Remove the top cover of the valve of an otsechka (6 on an illustration).
  1. Separate the socket of the valve of an otsechka and remove a washer (7 on an illustration).
  1. Shift a cover (8 on an illustration) so that to provide access to a collar (9), weaken a collar and remove the valve.
  2. Installation is made upside-down.

Valve of a purge of an adsorber

 PERFORMANCE ORDER

  1. Weaken quick disconnect connection of a hose of a purge of an adsorber (1 on illustrations) and remove the valve of a purge (2) from an arm.
Removal of the valve of a purge on petrol V6 engines.
  1. Accurately turn the valve and separate its socket (3 on illustrations) then disconnect the valve from a hose (4).
  2. Installation is made upside-down.