Saab 9-5

since 1997 of release

Repair and car operation


Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   General information
   Diagnostics of malfunctions of onboard electric equipment - the general information
   Safety locks - the general information
   The relay - the general information and check of serviceability of functioning
   Window regulators
   Podrulevye switches
   Combination of devices
   Removal and installation of lighting devices and replacement of their lamps
   Adjustment of an inclination of headlights
   Removal and installation of sensors of adjustment of an inclination of headlights
   Removal and horn installation
   Screen wipers and stekloomyvatel
   Sensors of system of the help at a parking
   Removal and installation of an audiosystem and loudspeakers.
   Removal and installation of components of SRS system
   Removal and installation of DICE and TWICE control units
   + electric equipment Schemes


Screen wipers and stekloomyvatel

Removal and installation of assembly of cleaners wind стекл and

 PERFORMANCE ORDER

  1. Remove a windscreen fairing (see. Section Removal and installation of forward wings and windscreen fairing).
  1. Uncover (5) central spindles, separate the socket (6) э / the motor, turn out 4 screws (7) and remove assembly of cleaners of a windscreen.
  1. Installation is made upside-down. At installation of levers of screen wipers watch that the distance between a brush and a cover equaled 39 mm on the left side and 57 mm on the right side.

Removal and installation of a cleaner of glass of a door of a back

 PERFORMANCE ORDER

  1. Remove the lever of a screen wiper and an internal covering of a door of a back (see. Section Removal, dismantling, assembly and installation of a door of a back and its components).
  1. Separate the socket (6), turn out 3 bolts (7) fastenings and disconnect a washer hose.
  1. Remove э / the motor together with an arm, then turn out bolts and remove э / the motor from an arm.
  1. Installation is made upside-down.

Removal and installation of pumps of stekloomyvatel

Pumps are fixed on the tank of washing liquid.


 PERFORMANCE ORDER

  1. Empty the tank of washing liquid and поддомкратьте the car.
  2. At removal of the pump of washing of a windscreen remove a loker of a wheel arch.
  3. Disconnect from the corresponding pump a hose, separate the socket of electroconducting and remove the pump from the tank.
Removal of the pump of washing of a windscreen.
Removal of the pump of washing of headlights.
Removal of the pump of washing of glass of a door of a back.

Adjustment snuffled windscreen washers

Nozzles of washers should be turned so that streams of liquid got on a windscreen according to an illustration.