Saab 9-5

since 1997 of release

Repair and car operation

Saab 9-5
+ Saab 9-5 Cars
- Governing bodies and operation receptions
   + Access, protection
   + Elements of systems of safety
   - Car equipment, arrangement of devices and governing bodies
      Combination of devices
      Governing bodies and salon equipment
   + Devices of ensuring comfort
   + Receptions of operation and auxiliary systems
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Governing bodies and salon equipment

Switches and the governing bodies located on a steering column

Left podrulevy switch

Left podrulevy the switch is intended for management of indexes of turns, switching of near and far light of headlights, the alarm system by a driving beam, and also for management the tempostaty.

Inclusion of a driving beam of headlights


1 — Inclusion of a driving beam 2 — the Alarm system a driving beam

For inclusion of a driving beam of headlights pull the lever on itself before the fixed situation. Thus will light up To/l a driving beam of headlights. Press the lever from itself for switching back in a mode of a passing beam of headlights.

For prevention of a discharge of the battery do not leave for a long time included headlights at the switched-off engine.

PERFORMANCE ORDER

The car has function of inclusion near on 30 with the ambassador of closing of a door of the driver is it is possible to use for illumination of the road from the car to the house. For use of this function take a key from the ignition lock, open a door of the driver and establish left podrulevy the switch in situation "2".
For signal giving by a driving beam of headlights pull left podrulevy the switch on itself, without leading up it to the fixed situation. The driving beam remains included at lever deduction, and after an otpuskaniya the lever comes back to initial situation.
For inclusion of the index of the left or right turn at the included ignition pull the lever of the podrulevy switch respectively down or up. Thus in a combination of devices the indicator of inclusion of the index of the corresponding turn lights up in a flashing mode. After completion of turn the switch automatically comes back to neutral situation.
At evolution it is possible to use evolution indexes for which inclusion it is necessary to pull slightly the switch up or down, without leading up against the stop, and to hold him in this situation. After an otpuskaniye the switch will automatically come back to starting (average) position.

The management description the tempostaty is provided in the Section Tempostat.

Right podrulevy switch

In order to avoid damage of the mechanism of screen wipers it is not necessary to include them if cleared glass dry, and also to move them hands. In order to avoid damage of brushes of screen wipers do not allow their contact to gasoline and other solvents. In order to avoid damage of the pump of a stekloomyvatel do not use it at the empty tank of washing liquid. Switch off the rain sensor at a wash of the car, and also at windscreen clarification to avoid damage of screen wipers and possible traumas.

Right podrulevy the switch is intended for management of cleaners and washers of the glasses which functioning is possible only at the included ignition.

Positions of the right podrulevy switch


0 — Neutral situation 1 — Interval mode/turning on of the sensor of a rain	2 — Normal speed 3 — the Increased speed 4 — washer Inclusion

Moving the switch lever up and down, it is possible to choose operating modes of cleaners of a windscreen and to switch off them. Between provisions 0 and 2 there is an unstable situation in which the screen wiper does a single course. At washer inclusion cleaners do from 3 to 5 courses depending on period of operation of a washer. If speed of the car less than 20 km/h, cleaners do one more course in 9 seconds.

At the included passing beam cleaners of lenses of headlights join at every sixth washing of a windscreen or if passed more than 2 minutes after the last washing. If the passing beam is switched off, cleaners of lenses of headlights join only at the first washing of a windscreen.

Cleaners of lenses of headlights cannot be included separately.

For a choice of duration of intervals of work of a screen wiper, or the 3-item switch is intended for adjustment of sensitivity of the sensor of a rain (on models with the corresponding complete set) (with a vertical course), located on the lever. In extreme top position of the switch interval/sensitivity maximum, and in the lowermost – minimum.

At the corresponding complete set the sensor of the rain located on a windscreen, about a rear-view mirror, automatically operates windscreen cleaning. Depending on a quantity of water or snow on glass, the sensor makes or single inclusion of cleaners, or includes them in a continuous mode. At turning on of the sensor of a rain (the position "1" of the right podrulevy switch) cleaners do one control course. After that the sensor compares quantity of water/snow on a windscreen to the initial quantity, defined at a control course. Cleaners do a control course as well at each increase in sensitivity of the sensor. For turning on of the sensor after switching off of ignition it is necessary to transfer previously right podrulevy the switch to neutral situation. The rain sensor in addition defines illumination and according to its size is switched in a night or day operating mode. In night situation sensitivity of the sensor automatically raises.

For management of a cleaner and a washer of glass of a door of a back (Versatile person model) it is intended 3-item (the provisions "ON", "OFF" and «») the switch (with a horizontal course), located on the lever. In the situation "ON" the cleaner works in an interval mode. In situation «» cleaning and glass washing is made. After several courses the cleaner stops and passes to an interval operating mode (if it is chosen). Approximately through 15 with the ambassador of switching off of a screen wiper it does one more course for removal from glass of the possible remains of liquid. Between the provisions "OFF" and "ON" there is an unstable situation in which the cleaner does one course. Besides, interval purification of glass of a door of a back joins by the chosen transfer of a backing and the switch of screen wipers established in provision "1", "2" or "3".

Horn switch

The button of inclusion of a horn is built in an overlay of a steering wheel – press it about a rim of a steering wheel.

Clamp of a tilt angle of a steering column

The steering column should be adjusted so that the steering wheel was opposite to a thorax of the driver. Situation at which the steering wheel is opposite to a face of the driver, is wrong as reduces protective functions of a forward safety cushion of the driver.

It is not necessary to regulate an inclination of a steering column during driving since control over driving can be thus lost.

PERFORMANCE ORDER

For change of a tilt angle of a steering column completely release a clamp (before click), located under it.

Establish a steering column in demanded situation and return a clamp to a starting position (before click) to fix it. Check reliability of fixing of a steering column, having pulled a steering wheel up-down.

Buttons of management of an audiosystem

Buttons of management are located an audiosystem on each side from an overlay of a steering wheel and intended for increase of safety of use of an audiosystem when driving.

Arrangement of buttons of management of an audiosystem on a wheel

The button with «NEXT» inscription at audiosystem work in a mode of radio is intended for cyclic switching between the preset radio stations (1> 2> …> 6> 1> …). At audiosystem work in a cartridge mode by pressing this button the direction of scrolling of a film (other party of the cartridge is played) changes. When playing CD by repeated pressing this button there is a cyclic change of a reproduced disk (1> 2> …> 6> 1> …).

The button with «SEEK» inscription at audiosystem work in a mode of radio is used for automatic/manual search of stations; in a cartridge mode – for fragment/rewind search, and in the CD mode – for path/high-speed playback change.

The button with «SRC» inscription by its repeated pressing cyclically switches audiosystem operating modes (radio> the cartridge> CD> a CD changer> radio> …).

The button with an inscription of "VOL" is intended for volume control.

The governing bodies located under a combination of devices

Governing bodies under a combination of devices are located at the left (switches and regulators of external lighting) and on the right (the switch of TCS/ESP systems) from a steering column.

In the block located closer to a door, the rotary switch of external lighting, the switch of back foggy lamps and a regulator of brightness of illumination of devices is established.

Control unit external lighting

In the block of the switches located closer to a steering column there is a switch of fog lights and a regulator of an inclination of headlights.

The rotary switch of external lighting has 3 provisions designated by the corresponding pictograms:

Passing beam of headlights. At the switch of a headlight established in this provision join/are switched off at respectively inclusion/switching off of ignition.

Marker lights. At the switch established in this situation marker lights burn irrespective of the provision of a key in the ignition lock.

Marker lights and passing beam of headlights – join at ignition inclusion. If necessary it is possible to cancel inclusion of external lighting at the switch established in this situation. For this purpose it is necessary to take a safety lock of No. 35 of the main assembly block (see. Head Onboard electric equipment).

Button of the switch of a back foggy lamp. The back foggy lamp joins under condition of inclusion of marker lights and a driving beam (the rotary switch in situation), or at the included fog lights. The included back foggy lamp dies away at switching off of the engine and at its repeated start does not join.

Brightness of illumination of devices changes by rotation of a wheel of the regulator located to the left of the switch of a back foggy lamp.

Location of the switch of fog lights (at the corresponding complete set) is specified illustrations.

Switch of fog lights

The regulator of an inclination of headlights is established on some models and allows to adjust range of illumination of the road at various values of loading of the car. For adjustment of an inclination of headlights it is required to include ignition and to establish a regulator wheel in the situation corresponding to loading of the car (see. Specifications). Previously it is necessary to make the main adjustment of headlights.

Regulator of an inclination of headlights

If the car is equipped with a regulator of an inclination of headlights and system of automatic adjustment of an inclination of headlights, to regulate an inclination of headlights manually follows only in case of the maximum loading of the car – establish a regulator wheel in situation "1".

The switch of ESP/TCS systems is intended for compulsory shutdown of data of systems (at the corresponding complete set).

Switch of ESP/TCS systems

Governing bodies and the salon equipment on the central console

On the central console of the car there is the greatest number of bodies of its management and the salon equipment.

The description of an audiosystem, the multipurpose display and systems of heating and To/in is provided in the Part of the Device of ensuring comfort; the switch of the uniform lock is described in Разделе Doors and trunk lid; governing bodies are described by transmission in the Section Use of automatic transmission (AT).

Switch of the alarm system

The switch of the alarm system with the built-in control lamp works in any position of the lock of ignition. For turning on of the alarm system press the switch button; for switching off – press the button once again. At the switched-on alarm system synchronously with all indexes of turns blinks To/l, built in the switch, and at the included ignition – and indicators of indexes of turns in a combination of devices. If the alarm system works for a long time, frequency of a blinking of indexes of turns decreases for the purpose of economy of a charge of the battery.

Switch of the alarm system

Switches regulators of heating and ventilation of forward seats

Switches of heating and ventilation of lobbies are intended for inclusion and adjustment of intensity of heating and ventilation of pillows and backs of forward seats. In situation "0" heating or ventilation are switched off; when moving switch up intensity increases.

Switches of ventilation of forward seats

Switches of heating of forward seats

On some models the heating of back seats which is switched on by the button is in addition established, to the central console located on a back wall.

Switch of heating of a back seat

Lighters and ashtrays

Do not hold the lighter pressed after he is ready to use since it can lead to its overheat; for the same reason the lighter should be taken from its nest if it automatically long does not come back to a starting position. Do not allow the general load of both lighters more than 240 W at their use as sockets of selection of capacity.

PERFORMANCE ORDER

To use the lighter, press it and release.

1 — Opening/closing
2 — Extraction

After the lighter will heat up to necessary temperature, it will automatically return to a starting position. In addition the lighter is available on a back wall of the central console, near the switch of heating of a back seat.

For using the lighter ignition should be included.

It is not necessary to use an ashtray for storage of any things since at contact with them zazhzhyonny cigarets or matches there can be a fire.

For using a forward ashtray press its cover.

To take an ashtray, pull it sideways. On some models of an ashtray are built in addition in at back doors.

Switch of ignition and blocking of a steering wheel

The switch of ignition and blocking of the steering wheel, called also the ignition lock, is located in the lower part of the central console, between seats.

Location of the lock of ignition

The lock of ignition has the following four situation:

LOCK — This position of the switch of ignition is used for blocking of a steering wheel and ignition key extraction. In this situation marker lights, warning signals and illumination of salon work. For key extraction from the lock of ignition backing transfer (models with RKPP) should be included, and on models from AT the lever of the selector should be in the situation "P".

OFF — In this situation is unblocked a steering wheel and the gear shifting lever the AT selector RKPP/lever.

ON — Normal position of the ignition key after engine start. Before engine start at key turn in this situation it is necessary to check short-term operation of the control lamps which have been built in a combination of devices (see. Section Keys, replacement of an element of a food of the DU block). In this provision of a key all electric equipment of the car works.

Do not leave the ignition key in the situation "OFF" at the switched-off engine since thus there is a fast discharge of the battery.

ST (START) — Is used for engine start. When keeping ignition key in this situation the starter will scroll the engine. In starter operating time some electric components will be disconnected, facilitating engine start. After an otpuskaniye the key comes back to the situation "ON".

Do not turn the ignition key in the situation LOCK or ACC at car movement since it can lead to controllability loss by the car and violation of functioning of brakes.

Chashkoderzhateli and a ware box in the central console

It is not necessary to use a coaster during car movement since at failure or sharp braking the subjects established in coasters can be at the bottom of a trauma of the driver and passengers. Especially it is not necessary to put in coasters not closed capacities with hot liquids at car movement since at a possible razbryzgivaniye of liquid the driver can burn and run away the car.

The built-in chashkoderzhatel has the ware box located in the console between seats. For opening of a box pull forward for the back party of its cover.

Access to a ware box

Additional chashkoderzhatel are located on a lobby and a back part of the central console.

Chashkoderzhatel in a forward part of the central console


1 — Opening to (press) 2 — Closing to (lift)

Chashkoderzhatel in a back part of the central console

Governing bodies and the equipment of salon located on a ceiling

Switches of internal lighting

In structure of devices of internal lighting forward and back salonny lamps, illumination of the mirrors which have been built in solar peaks, lamps in foot wells (in front, lamps in the doorway), and also the lamp in a luggage compartment ascend.

Switches and forward salonny lamp


1/3 — Internal lighting is included/is switched off irrespective of the provision of doors 2 — Internal lighting is included only at an open door

Each lamp for reading has own switch.

Back salonny lamp


1 — Lamps for reading 2 — Illumination of salon

The operating mode of internal lighting is established by means of the switch close to the forward salonny lamp, on the right. On the average position of the switch internal lighting joins:

When the car opens outside;
When opening one of doors;
At key extraction from the ignition lock.

Lighting dies away later 30 with the ambassador of closing of doors, or at ignition key turn in the situation "ON". If the door is left open at the switched-off ignition, internal lighting dies away 20 minutes later.

Switch of management of a cover of the top hatch

The switch of management is located a cover of the top hatch near the forward salonny lamp, in the center. The description of the switch is provided in the Section the Top hatch.

Sun-protection peaks and cosmetic mirrors

Double sun-protection peaks are located over a windscreen, on a ceiling at the left and on the right and are intended for prevention of dazzle by direct sunshine. Peaks are equipped with cosmetic mirrors (on inside) with the illumination joining at an otkidyvaniye of a mirror.

Solar peaks and cosmetic mirror

Internal rear-view mirror

Before a trip it is necessary to adjust an internal rear-view mirror, turning it so that in its center the center of back glass was visible. Thus the mirror should be in a normal mode.

For switching between night and day modes move the lever located behind a mirror, respectively to itself or from itself.

Switching of modes of a rear-view mirror


1 — Normal situation 2 — Antiblinding situation

On the models equipped with a rear-view mirror with possibility of automatic blackout, for switching between day and automatic modes the button located on its forward panel serves.

Rear-view mirror with automatic blackout


1 — the illumination Sensor in front 2 — the Switch of an automatic zateneniye 3 — the illumination Sensor behind

The mirror with an automatic zateneniye has two sensors of illumination: one is directed forward, and an arch – back. When the sensor directed forward defines decrease in natural lighting, the night mode (under condition of the included automatic mode) joins. The same occurs at hit on a mirror of bright light of headlights going behind the car. Inclusion of a night mode occurs gradually. At disappearance of bright light behind, and also at increase in brightness of natural lighting the mirror is automatically switched in a day mode.

At inclusion of transfer of a backing the automatic mode is disconnected, and the mirror works in a day mode. At towage of the high trailer the automatic mode can be switched off, since the trailer will cover the review of the sensor turned back.

The switches located on doors

In each door there are switches of management of window regulators (see. Section Glasses of doors). Besides at doors of the driver switches of opening of the hatch of a jellied mouth of a fuel tank and a cover of a luggage carrier/door of a back (are located see. Section of the Door and trunk lid), and also control unit external mirrors.

Control unit external mirrors

In the control unit the switch between the left and right mirror, the round switch of adjustment of provision of the chosen mirror is available external rear-view mirrors. In addition there is a button of an inclination of the right mirror at movement by a backing. For an inclination of the right mirror choose transfer of a backing and press this button. At switching off of transfer of a backing the right mirror automatically comes back to a starting position.

On the models equipped with memory of the provision of a seat of the driver, the provision of mirrors is brought in memory at the same time with storing of provision of a seat.

Heating of external mirrors joins at the same time with heating of back glass (see. Section System of automatic heating and air conditioning (ACC)).

It is possible to correct a reflector of a mirror as well manually, carefully pressing it in the necessary direction.

External mirrors can be put to a door if it is required to pass or park in a bottleneck.

Ware boxes

Besides the ware box located in central, salon of the car it is equipped with ware boxes, opposite to a seat of the forward passenger, located under handles of doors and in an armrest of a back seat.

Ware box from zaslonky supply of cold air

Ware box in an armrest of a back seat

In addition there are pockets on a forward part of pillows of forward seats, on a back part of backs of forward seats, and also on body racks, for backs of forward seats.

It is possible to submit cold air to the ware box located opposite to a seat of the forward passenger, for example, for cooling of the drinks which were stored in a box – pull a zaslonka on itself.