|
|
- For inclusion/switching off of system press this switch. At inclusion the audiosystem starts to work with the settings made before its switching off. Switching off of an audiosystem is made as well at ignition switching off, and also in an hour of its work at the switched-off ignition if any button was not pressed.
|
Turning the switch handle in normal situation it is possible to change loudness level. At rotation of the extended handle of the switch it is possible to regulate balance between the right and left loudspeakers.
|
|
- For adjustment of level of low and high frequencies, and also sound distributions between lobbies and back loudspeakers press respectively BAS/TRE/FAD regulator that it left the audiosystem panel, and rotate it.
|
|
|
- By short-term pressing the button to figure in a mode of radio there is a choice of radio station in advance programmed on it. By long pressing in a radio mode the current frequency is appointed to this button. In a CD changer mode by means of these buttons the disk choice is made.
|
|
|
- By short-term pressing a part of the button with an arrow in a mode of radio automatic search of radio station is made, and by long pressing – manual search. By short-term pressing an average part
of the button in a radio mode on the display the current frequency is displayed, and by long pressing – the PTY code.
|
By short-term pressing a part of the button with an arrow in a mode of the tape recorder fragment search joins, and by long pressing – rewind. By pressing an average part
of the button in a tape recorder mode (to a sound signal) inclusion/switching off of a mode of the admission of a blank space on a film is made.
|
|
- By short-term pressing this button inclusion/switching off of an additional range of frequencies which can be used for storing of radio stations is made. At deduction of this button more than 1 second automatic search of six strongest in sounding of stations joins.
|
By short-term pressing a part of the button with an arrow in the CD mode path change is made, and by long pressing – the accelerated playing / the accelerated change of a path. By short-term pressing an average part
of the button in the CD mode switching between modes of the accelerated playing (PLAY) and the accelerated change of paths (TRACK) is made, and by long pressing the mode of playing of each path of a disk from 30 to 38 second (SCAN mode) joins. By pressing a part of the button with an arrow in a mode of a CD changer the functions defined for the CD mode are carried out. By short-term pressing an average part
of the button in a mode of a CD changer switching between the PLAY and TRACK modes is made, and by long pressing (1 sound signal) – SCAN mode inclusion for the current disk. By especially long pressing an average part
of the button in a CD changer mode (2 sound signals) the SCAN mode for all disks joins.
|
|
- By short-term pressing there is an inclusion of a mode of radio, and then change of ranges of frequencies. At deduction of this button RDS inclusion/switching off is made.
|
|
|
- By short-term pressing there is an inclusion of a mode of translation of road news. At deduction of this button PTY inclusion is made. At longer deduction of the button (2 sound signals) PTY is switched off.
|
|
|
- By pressing of this button there is a turning on of the tape recorder (at other current mode), or inclusion of suppression of noise of the cartridge.
|
|
|
- The button is intended for change of the party of the cartridge.
|
|
|
- The button is intended for cartridge or CD extraction, depending on the current mode.
|
|
|
- By short pressing of this button CD reproduction joins, and at deduction the mode of reproduction of paths of CD in any order joins.
|
|