Saab 9-5

since 1997 of release

Repair and car operation



Saab 9-5
+ Saab 9-5 Cars
- Governing bodies and operation receptions
   + Access, protection
   + Elements of systems of safety
   + car Equipment, arrangement of devices and governing bodies
   + Devices of ensuring comfort
   - Receptions of operation and auxiliary systems
      Start of the engine and start of motion
      Tempostat
      Use of a manual box of gear shifting (RKPP)
      Use of automatic transmission (AT)
      Brake system
      Hydraulic booster of a steering (GUR)
      Features of operation of the cars equipped with the catalytic converter
      Trailer towage
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Trailer towage

At towage of the trailer term of operation of the car and its profitability since load of the components involved in transfer of a torque (beginning from the engine and finishing tires of wheels) increases decreases.

Observe requirements of Specifications to the most admissible mass of the towed trailer.

Before towage of the trailer make sure that it, no less than the car, corresponds to the requirements shown by traffic regulations and the local legislation to the admission to operation of vehicles with the trailer. Use only the certificated coupling devices which installation it is necessary to charge to skilled experts. Similar requirements are shown and to connection of brake system of the trailer.

During towage of the trailer choose speed and other parameters of movement proceeding from weight of the trailer.

Load the trailer so that load of its coupling device made from 65 to 75 kg. Remember that the trailer increases the actual mass of the car, and do not allow excess of the most admissible weight of the car and the maximum load of an axis.

Points of fastening of the original Saab coupling device are given in Specifications.

The sequence of installation of the coupling device is given on an illustration.

Sequence of installation of the coupling device