Saab 9-5

since 1997 of release

Repair and car operation



Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
- Systems of cooling of the engine, heating, ventilation and air conditioning
   - System of cooling of the engine
      General information and precautionary measures
      Removal and installation of the water pump
      Removal and thermostat installation
      Removal and installation of assembly of fans of a radiator
      Fan replacement
      Removal and radiator installation
      Removal and installation of a maslookhladitel of 4-cylinder petrol engines
      Removal and installation of a broad tank
   + Systems of heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Removal and installation of a maslookhladitel of 4-cylinder petrol engines

 PERFORMANCE ORDER

  1. To Poddomkratta the car also remove a forward bottom protective casing (2 on an illustration).
  1. Turn out screws of fastening of a maslookhladitel (3 on an illustration).
  1. Give a nut (4 on an illustration) fastenings of hoses to a maslookhladitel.
  1. Disconnect hoses (5 on an illustration).

Do not use a screw-driver for separation of hoses since thus it is possible to damage the sealing ring established in connection.

  1. To Zakuporta hoses also lower a maslookhladitel.
  2. Check a condition of sealing rings, if necessary replace them.
  3. Grease sealing rings with Gleitmo 805 greasing and establish them into place.

Further installation is made upside-down.

After installation start the engine and make sure of absence of leakages of oil.