Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
- Coupling and power shafts
General information
- Coupling
Removal, check and installation of assembly of coupling
Removal and installation of a pedal of coupling and its arm
Removal and installation of the main and executive cylinders
Pumping of coupling and its executive cylinder
+ Power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Coupling
Removal, check and installation of assembly of coupling
Removal and check
|
|
- Remove RKPP (see. Head Manual box of gear shifting).
|
|
- Fix a flywheel by means of the special adaptation (2), turn out bolts (3) fastenings and remove press a disk from a flywheel.
|
- Examine the surface of a flywheel interfaced to coupling. Existence of a raid of dark blue color, and also thin not deep scratches are not the reasons for concern while in the presence of deep scratches it is necessary to replace a flywheel.
- Check press a disk on existence of scratches and other damages. If press not equal, it it is necessary to replace a disk.
- Strongly worn-out press also it is necessary to replace a disk.
- Rotating press the bearing, check it on existence of excessive noise, and also on wear existence. If necessary replace press the bearing.
|
|
Installation
|
|
- Establish conducted and press disks on a flywheel and slightly fix them bolts.
|
|
On diesel V6 engines the convex party should be turned to RKPP. |
- By means of the special adaptation center coupling and tighten bolts of its fastening with demanded efforts.
|
|
On diesel V6 engines put on a carving of bolts fixing hermetic. |
- Remove the adaptation for fixing of a flywheel and establish RKPP.
|
|
|
|