Saab 9-5

since 1997 of release

Repair and car operation



Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   - External equipment and body elements
      Removal and installation of bumpers
      Removal and installation decorative radiator reshyotok
      Removal and installation of spoilers
      Removal and installation of a covering and decorative panel of a trunk lid
      Removal and installation of loker of wheel arches
      Removal and installation of forward wings and windscreen fairing
      Removal and installation of beams of the top luggage carrier of the Versatile person models
      Removal and installation of assembly of the top hatch and its components
      Removal and installation of a cowl and its lock
      Removal, installation, dismantling and assembly of a forward door and its components
      Removal, installation, dismantling and assembly of a back door and its components
      Removal, dismantling, assembly and installation of a door of a back and its components
      Removal and installation of a trunk lid and its components
      The fixed glasses
   + salon Equipment
+ Onboard electric equipment





Removal and installation of a trunk lid and its components

Trunk lid

 PERFORMANCE ORDER

  1. Open a trunk lid and separate the socket under a cover in a covering before left combined фонарём (2).
  1. Disconnect a hose (3) from a body, and then from a loop.
  1. Remove a clamp (4) fastenings drains to the hinge and disconnect a rack (5) from a loop.
  1. Give 2 bottom nuts (6) fastenings of a trunk lid to loops, then on some turns give two top nuts (7) and uncover a luggage carrier.
  2. Installation is made upside-down. After installation adjust the provision of a door concerning a body.
  1. To displace a trunk lid it is possible at the released nuts forward-back.
  1. Trunk lid adjustment on height is made at the released screws of fastening of its loops to a body. It is possible to adjust separately height of the forward party of a trunk lid (at the released forward screws).
  1. The height of the back party of a trunk lid is regulated by means of rotation of rubber support.

External handle

 PERFORMANCE ORDER

  1. Remove a plate of registration plate and open a trunk lid.
  1. Give nuts of fastening of the decorative panel and remove it.
  1. Give nuts, compress clamps and remove the left combined lamp.
  1. Give 4 nuts (5) fastenings of the handle, slightly delay it, separate the socket of electroconducting (7) and remove the handle.
  1. Installation is made upside-down.

Lock

 PERFORMANCE ORDER

  1. Remove the internal handle and a covering from within a luggage carrier (1). Turn out 3 screws of fastening of the lock (2).
  1. Turn a clamp (3) rods of a drive of the lock and disconnect a rod. Remove a rod and the lock (4).
  1. At replacement of the lock transfer a rod on the new lock.

Э / motor of a drive of the lock

 PERFORMANCE ORDER

  1. Remove the internal handle and a covering from within a luggage carrier (1).
  2. Turn a clamp (3) rods of a drive of the lock and disconnect a rod.
  1. Take the central pin of fastening of the mechanism of a drive of the lock and remove the mechanism, having left it to hang on draft.
  1. Turn out fastening screws э / the motor, separate the socket (5) and remove э / the motor (6).
  2. Installation is made upside-down.