Saab 9-5

since 1997 of release

Repair and car operation



Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   - External equipment and body elements
      Removal and installation of bumpers
      Removal and installation decorative radiator reshyotok
      Removal and installation of spoilers
      Removal and installation of a covering and decorative panel of a trunk lid
      Removal and installation of loker of wheel arches
      Removal and installation of forward wings and windscreen fairing
      Removal and installation of beams of the top luggage carrier of the Versatile person models
      Removal and installation of assembly of the top hatch and its components
      Removal and installation of a cowl and its lock
      Removal, installation, dismantling and assembly of a forward door and its components
      Removal, installation, dismantling and assembly of a back door and its components
      Removal, dismantling, assembly and installation of a door of a back and its components
      Removal and installation of a trunk lid and its components
      The fixed glasses
   + salon Equipment
+ Onboard electric equipment





Removal and installation of spoilers

Forward spoilers

 PERFORMANCE ORDER

  1. Forward spoilers are established on corners of a front bumper, from below.
  1. Turn out screws of fastening of a spoiler (2). For ensuring access to the internal screw of a spoiler turn out the bottom screw in a loker and slightly delay a bumper.
  1. Pull a spoiler forward and remove it from spring holders.
  2. Installation is made upside-down.

Back top spoiler of the Sedan models

 PERFORMANCE ORDER

  1. Remove an internal covering of a trunk lid as it is described in the Section Removal and installation of a covering and the decorative panel of a trunk lid.
  1. Give 5 nuts (2), close a trunk lid and remove a spoiler.
  1. Installation is made upside-down.

Back top spoiler of the Versatile person models

 PERFORMANCE ORDER

  1. Open a door of a back and remove from it the top cover (2).
  1. Remove two rubber stoppers (3) and a stoplight of the top level (4).
  1. Turn out bolts of fastening of a spoiler (5) and close a back door then give the central nut (6).

Access to the central nut can be received through area to the left of a stoplight.

  1. Remove a spoiler.
  2. Installation is made upside-down.

Back bottom spoiler

The back bottom spoiler is established on the lower part of a bumper.


 PERFORMANCE ORDER

  1. To Poddomkratta the car also remove lateral porous blocks (2).
  1. Give on two nuts (3) from each party and remove a spoiler from a bumper.
  2. Installation is made upside-down.