Saab 9-5

since 1997 of release

Repair and car operation



Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
- Engine
   General information and preparatory operations
   Check of kompressionny pressure
   Engine check by means of the vacuum gage
   + Repair of 4-cylinder petrol engines
   + Repair of 6-cylinder petrol engines
   - Repair of 6-cylinder diesel engines
      Removal and installation of heads of cylinders and driving belts
      Removal and installation of a back cover of a belt of a drive of GRM
      Check of klapanny gaps
      Removal and installation of pallets of a case
      Check of pressure of impellent oil
      Removal and installation of the power unit
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Check of pressure of impellent oil

 PERFORMANCE ORDER

  1. To Poddomkratta the car also establish it on props. Remove the bottom protective casing of an impellent compartment.
  1. Separate the socket of the sensor of pressure of impellent oil and remove the sensor.
  1. Establish to the place of the sensor a manometer with a hose adapter.

The hose should not be glad with hot or rotating components of an impellent compartment.

  1. Lower the car on the earth, start the engine and consider manometer indications. Compare the measured value to requirements of Specifications.
  2. Remove a manometer with a hose, establish the sensor of pressure of oil and the bottom protective casing.