Saab 9-5

since 1997 of release

Repair and car operation

Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
- Power supply system and production of the fulfilled gases
   General information and security measures
   Sbrasyvaniye of pressure in fuel system
   + Power supply system of petrol engines
   - Power supply system of the diesel V6 engine
      General information
      Removal and installation of a sleeve of an air inlet, case of the air filter and MAF sensor
      Removal and installation of the inlet pipeline
      Replacement of the sensor of provision of a pedal of gas
      Replacement of sensors of a turbo-supercharging and sensor of temperature of fuel
      Replacement of the valve of management with pressure of pressurization
      Removal and turbokompressor installation
      Removal and installation of an interkuler
      Removal and installation of a fuel tank
      Replacement of the fuel filter
      Removal and installation of the fuel distributive highway
      Removal and installation of the sensor of a stock of fuel
      Removal and TNVD installation and replacement of its epiploon
      Removal and installation of nozzles
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal and installation of an interkuler


  1. Remove headlights and поддомкратьте the car.
  2. Remove the bottom protective casing of an impellent compartment.
  1. Suspend the condenser cooling a contour of GUR liquid and a radiator on plaits to a body of the car and lower it.
  1. Give nuts of fastening of a cooling contour of GUR liquid (7 on an illustration).
  1. Remove an arm (8 on an illustration) fastenings of the bottom tube of forced air on a stretcher, and also an arm (9) radiators.
  1. Weaken collars (10 on an illustration) fastenings of hoses to an interkuler and slightly lower the car.
  1. Remove from an interkuler the condenser (12 on an illustration) then lower and remove an interkuler.
  2. Installation is made upside-down.