Saab 9-5

since 1997 of release

Repair and car operation



Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   General information, recommendations and security measures
   - Forward suspension bracket
      Removal, dismantling, assembly and installation of a nave and rotary fist
      Removal, dismantling assembly and installation of a rack of a suspension bracket
      Replacement of a stretcher of petrol models
      Replacement of a stretcher of diesel models
      Removal and installation of the stabilizer of a suspension bracket
   + Back suspension bracket
   + Steering
   + suspension bracket Geometry
+ Body
+ Onboard electric equipment





Replacement of a stretcher of petrol models

 PERFORMANCE ORDER

  1. Uncover the inlet pipeline. On the V6 models give nuts from a flange of an exhaust pipe.
  1. Turn out bolts of fastening of a back pillow of the engine to a stretcher.
  1. Disconnect from a stretcher a transmission support. On the V6 models establish 2 elevating eyes: one on a back part of a head of cylinders, another – to the place of a bolt on a forward part of a head of cylinders.
  2. Establish the lift on wings and will hang out the engine.
  3. Separate electroconducting sockets a lambda probe (ов) and remove its collars.
  4. Remove forward wheels and the bottom protective casings of an impellent compartment.
  1. Give fixture of a maslookhladitel, having left it to hang on hoses. Fasten a plait radiator assembly to its support.
  1. Remove the amplifier (11) from a back part of a stretcher, at the corresponding complete set remove from the catalytic converter the sensor of temperature and lower forward section of an exhaust pipe (12).
  1. Turn out two bolts of fastening of the steering mechanism (13).
  1. Disconnect from a stretcher levers of a suspension bracket (14) and the stabilizer of cross-section stability (15).
  1. Give nuts of fastening of an air purifier to a stretcher.
  2. Remove from a stretcher a back collar of a tube of GUR and an arm. Also liberate tubes To/in from their holders.
  3. Prop up a stretcher and turn out the remained bolts of its fastening (see an illustration Fixture of components of a forward suspension bracket and a steering).
  4. Slightly lower a stretcher so to provide access to not removed collars of tubes of GUR.
  1. Lower a stretcher and remove arms (20) fastenings of assembly of a radiator and holders (21) tubes К/В.
  1. Installation is made upside-down. Tighten fixture with demanded efforts.