Saab 9-5

since 1997 of release

Repair and car operation

Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   General information, recommendations and security measures
   - Forward suspension bracket
      Removal, dismantling, assembly and installation of a nave and rotary fist
      Removal, dismantling assembly and installation of a rack of a suspension bracket
      Replacement of a stretcher of petrol models
      Replacement of a stretcher of diesel models
      Removal and installation of the stabilizer of a suspension bracket
   + Back suspension bracket
   + Steering
   + suspension bracket Geometry
+ Body
+ Onboard electric equipment

Removal and installation of the stabilizer of a suspension bracket


  1. Uncover the inlet pipeline and turn out bolts of fastening of a back pillow of the engine to a stretcher (see an illustration).
  2. Establish the lift on wings and will hang out the engine for a back elevating eye.
  3. To Poddomkratta the car also remove forward wheels.
  1. Remove the amplifier of a stretcher (5), turn out 2 bolts (7) fastenings of the steering mechanism and average bolts (8) stretcher fastenings. Lower a back part of a stretcher.
  1. Disconnect the suspension bracket stabilizer from its racks (9), turn out bolts (10) fixing brackets of the stabilizer to a stretcher and take it from under the car through the right wheel arch.
  1. If necessary replace rubber plugs of basic brackets of the stabilizer. Plugs establish cuts back, previously having greased them with means of Molycote 33.
  2. Installation is made upside-down. Watch that е any hoses and electroconducting were clamped.