Saab 9-5

since 1997 of release

Repair and car operation

Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   General information, recommendations and security measures
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Removal and installation of tips and protective covers of steering drafts
      Removal and installation of the steering mechanism and steering drafts
      Removal and installation of a steering wheel
      Removal and installation of assembly of a steering column
      Removal and pump GUR installation
   + suspension bracket Geometry
+ Body
+ Onboard electric equipment

Removal and pump GUR installation

Below the description for 4-cylinder models is provided.


  1. Empty a hydraulic actuator of the amplifier of a steering as it is described in the Section Removal and installation of the steering mechanism and steering drafts, and connect a hose to the GUR tank.
  2. Remove an air line with the MAF sensor and a belt of a drive of auxiliary units.
  1. Remove from the pump GUR soaking-up tube (10), weaken a collar and remove from the pump submitting tube (11).
  1. Turn out bolts (12) fastenings of the pump GUR and remove it.

Do not allow GUR liquid hit on the painted surfaces of a body.

  1. Installation is made upside-down. Make sure of absence of leakages of GUR liquid in the field of the pump.