Saab 9-5

since 1997 of release

Repair and car operation

Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
- Suspension bracket and steering
   General information, recommendations and security measures
   + Forward suspension bracket
   + Back suspension bracket
   - Steering
      Removal and installation of tips and protective covers of steering drafts
      Removal and installation of the steering mechanism and steering drafts
      Removal and installation of a steering wheel
      Removal and installation of assembly of a steering column
      Removal and pump GUR installation
   + suspension bracket Geometry
+ Body
+ Onboard electric equipment

Removal and installation of a steering wheel


  1. Switch off ignition and establish a steering wheel in the provision of rectilinear movement.
  1. Turn out 2 screws of fastening of the block of a safety cushion.
  1. Accurately remove a safety cushion from a steering wheel and separate sockets of a horn and an audiosystem (4). Separate sockets (5) as well on the back party of a pillow.
  1. Give a nut of a steering wheel (6) and remove a washer.
  1. Slightly delay a steering wheel so to get access to the socket on a spiral spring and separate it (8) then finally remove a steering wheel.
  1. Turn out 3 screws (10) and remove the top and bottom casings of a steering column.
  2. Remove right podrulevy the switch and cut a cable coupler.
  1. Separate the socket (13) of a spiral spring (15), turn out 2 screws (14) of its fastening and remove a spring.
  1. Installation is made upside-down. Before installation of a spiral spring make sure that it is fixed in the central situation. After installation remove codes of malfunction of SRS system.