Saab 9-5

since 1997 of release

Repair and car operation

Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
- Manual box of gear shifting
   Transmission identification
   General information
   Removal and installation of a casing of the lever of gear shifting
   Adjustment, removal and installation of a drive of gear shifting and ignition lock
   Replacement of the handle of the lever of gear shifting
   Removal and RKPP installation of 4-cylinder engines
   Removal and RKPP installation of diesel V6 engines
   Removal and Д/В installation of lamps of a backing
   Replacement of epiploons of power shafts
   Design and major maintenance of a transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Replacement of epiploons of power shafts

Epiploon and sealing ring of the left power shaft


  1. To Poddomkratta the car also remove the left forward wheel.
  1. Take a power shaft from RKPP (2) and remove holders (3) brake hoses and ABS wires.
  1. Turn out a bolt (4) fastenings of a spherical support of a suspension bracket to a rotary fist, pull out a spherical support and fix it by means of the wooden whetstone established between the lever and the stabilizer of a suspension bracket.
  2. Turn a wheel to the right and pull on itself the holder of a rack of a suspension bracket. The power shaft leaves RKPP. Lay a power shaft on the suspension bracket lever.
  1. Take an epiploon by means of the special adaptation.
  1. Remove the case of an epiploon and replace its sealing ring.
  1. Establish the epiploon case.
  2. Press a new epiploon in the case, previously having greased it with pure transmission oil.
  3. Make sure that a power shaft pure and get it in RKPP.
  4. Establish a spherical support of a suspension bracket and other acting in film components.
  5. Check level of transmission oil and if necessary modify its level.

Epiploon of the right power shaft


  1. Remove an intermediate shaft (see. Head Coupling and power shafts).
  1. Take an old epiploon by means of a big screw-driver.
  1. Press a new epiploon and establish an intermediate shaft.