Saab 9-5

since 1997 of release

Repair and car operation



Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
- Automatic transmission
   General information
   Search of malfunctions - the general information
   Removal and installation of assembly of the lever of the selector of AT modes and its casing
   Removal, installation and adjustment of a cable of the selector of AT modes
   Removal and installation of the lever of the selector of AT modes and dismantling of its casing
   Removal and installation Ý/m AT valves, their case and its cover
   Removal and installation of sensors of speed
   Removal and installation of the AT hydraulic lines
   Removal and TCM installation
   Replacement and adjustment of the sensor of position of the selector of AT modes
   Removal and AT installation
   Replacement of epiploons of power shafts
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Removal and installation of assembly of the lever of the selector of AT modes and its casing

 PERFORMANCE ORDER

  1. Remove the central and bottom consoles of the dashboard, and also an air line of back deflectors (see. Head Body).
  1. Remove a lock ring and an antinoise clamp (2).
  1. Take away a finger (3) and remove a cable tip from a ball.
  2. Turn out screws (4) fastenings of a casing and separate the socket (5).
  3. Raise a casing, cut couplers of electroconducting of the lock of ignition and a safety cushion then separate the socket (6) of the lock of ignition.
  1. Remove a bracket (7) located behind a clamp (8) and, having accurately compressed his uvulas, liberate a cable from the holder.
  1. Remove a casing with the selector lever.
  2. Installation is made upside-down.
  3. In conclusion of installation adjust a selector cable (see. Section Removal, installation and adjustment of a cable of the selector of AT modes).