Saab 9-5

since 1997 of release

Repair and car operation


Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
- Automatic transmission
   General information
   Search of malfunctions - the general information
   Removal and installation of assembly of the lever of the selector of AT modes and its casing
   Removal, installation and adjustment of a cable of the selector of AT modes
   Removal and installation of the lever of the selector of AT modes and dismantling of its casing
   Removal and installation Ý/m AT valves, their case and its cover
   Removal and installation of sensors of speed
   Removal and installation of the AT hydraulic lines
   Removal and TCM installation
   Replacement and adjustment of the sensor of position of the selector of AT modes
   Removal and AT installation
   Replacement of epiploons of power shafts
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Removal and installation of the lever of the selector of AT modes and dismantling of its casing

 PERFORMANCE ORDER

  1. Remove assembly of the lever of the selector and its casing (see. The section Removal and installation of assembly of the lever of the selector of AT modes and its casing) also transfer the lever to situation "D" or "N".
  1. Turn out the screw (2) and remove forward section (3) furnish of the lever then squeeze out up the button (4) inclusions of the AT sports mode and отпаяйте it.
  1. Take a clamp in an average part of the lever and remove the button of removal of fixing together with a back part of furnish of the lever.

Electroconducting remains in furnish.


  1. Cut a coupler (3) electroconductings of illumination and a coupler (4) electroconductings of an electromagnet of blocking then separate the socket (5) of electroconducting of an electromagnet.
  1. In need of replacement of an electromagnet of blocking of the selector turn out screws (5) of its fastening, take from its top part the lever (6) and remove an electromagnet.
  1. Turn out screws (6) and remove the indicator of the chosen AT mode. Drill rivets (7).
  1. Turn out a bolt of fastening of the lever of the selector and remove the lever together with the holder from a basic plate.
  1. Remove a lock washer, beat out the plug and separate the selector lever from his holder.
  2. Installation is made upside-down, use a new lock washer.