Saab 9-5

since 1997 of release

Repair and car operation



Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
- Automatic transmission
   General information
   Search of malfunctions - the general information
   Removal and installation of assembly of the lever of the selector of AT modes and its casing
   Removal, installation and adjustment of a cable of the selector of AT modes
   Removal and installation of the lever of the selector of AT modes and dismantling of its casing
   Removal and installation Ý/m AT valves, their case and its cover
   Removal and installation of sensors of speed
   Removal and installation of the AT hydraulic lines
   Removal and TCM installation
   Replacement and adjustment of the sensor of position of the selector of AT modes
   Removal and AT installation
   Replacement of epiploons of power shafts
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


fifa- fifa-



Removal and installation Ý/m AT valves, their case and its cover

Valves of management of pressure and blocking are not subject to replacement. Below приводнится the description on AT AF33-5 example.


 PERFORMANCE ORDER

  1. To Poddomkratta the car also establish it on props.
  1. Remove from an arm a support (2) and a wire of weight (3) then give bolts (4) fastenings of an arm and remove it. Disconnect hoses of a maslookhladitel (5).

Prepare for collecting the oil following from hoses. After removal of hoses закупорьте them.


  1. Turn out bolts (6) fastenings of a cover of klapanny assembly and uncover (7), having brought down it a hammer with rubber the brisk.
  1. Separate the socket replaced Ý/m the valve of switching (2), turn out a bolt of its fastening (3), and remove the valve.
Removal Ý/m valves of switching of AT AF33-5.
Removal Ý/m valves of switching of AT AF30.
  1. At removal of klapanny assembly separate sockets (2) of all Ý/m valves, and also the sensor of temperature of ATF. Turn out bolts (3) fastenings of klapanny assembly.
Sockets Ý/m valves and sensor of temperature of ATF, bolts of fastening of klapanny assembly (AF33-5).
Sockets Ý/m valves and sensor of temperature of ATF, bolts of fastening of klapanny assembly (AF30).

Bolts of fastening of klapanny assembly have different length.

  1. Accurately disconnect the valve (4) of manual control from the lever of the selector and remove klapanny assembly.

Do not lose two sealing rings of klapanny assembly.

  1. Installation is made upside-down.

Before installation of a cover clear it and remove from it the remains sealing materials then put on its interfaced surfaces a hermetic strip in thickness of 1 mm. A carving of bolts of fastening of a cover process fixing hermetic.

  1. In conclusion of installation check level of ATF and if necessary modify it (see. Head of Control and routine maintenance of the car).