Saab 9-5

since 1997 of release

Repair and car operation



Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
- Automatic transmission
   General information
   Search of malfunctions - the general information
   Removal and installation of assembly of the lever of the selector of AT modes and its casing
   Removal, installation and adjustment of a cable of the selector of AT modes
   Removal and installation of the lever of the selector of AT modes and dismantling of its casing
   Removal and installation Ý/m AT valves, their case and its cover
   Removal and installation of sensors of speed
   Removal and installation of the AT hydraulic lines
   Removal and TCM installation
   Replacement and adjustment of the sensor of position of the selector of AT modes
   Removal and AT installation
   Replacement of epiploons of power shafts
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment



Removal and installation of sensors of speed

Below the description on AT AF33-5 example is provided. The arrangement of sensors of speed on AT AF30 is specified illustrations Components of management of AT.


 PERFORMANCE ORDER

  1. Remove the storage battery together with its pallet.
  1. At removal of the sensor of speed of primary shaft remove the holder of electroconducting of the battery (4). At removal of the sensor of speed of a secondary shaft remove the assembly block of the relay and safety locks.
  1. Clear area round the removed sensor, turn out its fixing bolt and remove the sensor then separate its socket.
  1. Installation is made upside-down.