Saab 9-5

since 1997 of release

Repair and car operation

Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   General information and security measures
   Pumping of brake system and replacement of brake liquid
   Replacement of brake shoes
   Removal and installation of brake disks
   Removal and installation of brake supports
   Removal and installation of a pedal of a brake
   Removal and installation of the vacuum pump
   Removal and installation of the tank of brake liquid and GTTs
   Removal and installation of brake lines
   Removal and installation of components of the parking brake and its drive
   Removal and installation of components of auxiliary systems (ABS/TC/ESP)
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Removal and installation of the tank of brake liquid and GTTs


  1. Remove components.

Ensuring access to the tank of brake liquid

2 — the Socket of the sensor of level of brake liquid
3 — the Storage battery
4 — Termozashchitny the turbokompressor screen (diesel engines)
5 — Fixture of the block of the relay and safety locks
  1. Uncover the tank of brake liquid and pump out from it liquid.
  1. On models from RKPP disconnect a hose (6) hydraulic actuators of coupling from the lower part of the tank (7).
  1. If the tank or GTTs is replaced separately, put on a cover of the tank and extend it up with GTTs.
  2. Clear area round brake tubes (8) and disconnect them from GTTs.
  3. Give two nuts (9) fastenings of GTTs and remove it. Examine a sealing ring of GTTs and if necessary replace it.
  4. Installation is made upside-down. After installation fill the tank and pump over a hydraulic actuator of brake system and coupling (model with RKPP).