Saab 9-5

since 1997 of release

Repair and car operation



Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   General information and security measures
   Pumping of brake system and replacement of brake liquid
   Replacement of brake shoes
   Removal and installation of brake disks
   Removal and installation of brake supports
   Removal and installation of a pedal of a brake
   Removal and installation of the vacuum pump
   Removal and installation of the tank of brake liquid and GTTs
   Removal and installation of brake lines
   Removal and installation of components of the parking brake and its drive
   Removal and installation of components of auxiliary systems (ABS/TC/ESP)
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Removal and installation of brake disks

Replacement of brake disks should be made on both wheels of one axis; to a stern of that, at the same time with replacement of disks it is necessary to replace and blocks. The description only for one wheel below is provided.

Forward brake disks

 PERFORMANCE ORDER

  1. To Poddomkratta the car also remove forward wheels.
  1. Squeeze out the piston of the brake cylinder and turn out bolts of fastening of an anchor bracket to a rotary fist. Suspend assembly of the brake mechanism on a rack of a suspension bracket so that not to load a brake hose.
  1. Turn out bolts of fastening of a brake disk and remove it from a nave.
  1. Clear a brake disk and establish it on a nave.

On the surfaces of a disk interfaced to a nave there should not be a rust and задиров. A carving of bolts of fastening of a disk grease with Loctite 242 hermetic.

  1. Establish an anchor bracket together with a support, previously having greased bolts of its fastening with Loctite 242 hermetic.
  2. Establish wheels and lower the car on the earth.
  3. Squeeze out a brake pedal to wring out pistons of brake cylinders both in summary check and if necessary modify level of brake liquid.
  4. Be passed on the car and check serviceability of functioning of brake mechanisms.

Back brake disks

 PERFORMANCE ORDER

  1. To Poddomkratta the car also remove back wheels.

Models with a floating support

 PERFORMANCE ORDER

  1. Squeeze out the piston of the brake cylinder (2) and turn out bolts (3) fastenings of an anchor bracket. Suspend assembly of the brake mechanism on a rack of a suspension bracket so that not to load a brake hose.
  1. Weaken a drive of the parking brake (4), turn out bolts (5) fastenings of a brake disk and remove it from a nave.
  1. Clear a brake disk and establish it on a nave.

On the surfaces of a disk interfaced to a nave there should not be a rust and задиров. A carving of bolts of fastening of a disk grease with Loctite 242 hermetic.

  1. Adjust the parking brake (see. Section Check of brake system).

Models with a motionless support

 PERFORMANCE ORDER

  1. Wring out the external piston of the brake cylinder.
  1. Turn out bolts of fastening of a support, liberate a brake hose from a clamp on the lever of a suspension bracket and suspend a support so that not to load a brake hose.