Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
- Brake system
General information and security measures
Pumping of brake system and replacement of brake liquid
Replacement of brake shoes
Removal and installation of brake disks
Removal and installation of brake supports
Removal and installation of a pedal of a brake
Removal and installation of the vacuum pump
Removal and installation of the tank of brake liquid and GTTs
Removal and installation of brake lines
Removal and installation of components of the parking brake and its drive
Removal and installation of components of auxiliary systems (ABS/TC/ESP)
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Removal and installation of a pedal of a brake
|
|
- Shift forward seats as it is possible further and remove the components specified an illustrations Ensuring access to the main cylinder of coupling.
- Separate the socket of electroconducting of the engine and remove it the holder from a partition of an impellent compartment.
|
|
- Give nuts of fastening of an arm of the amplifier of brakes/assembly of pedals (3) and remove the bottom section of the dashboard.
|
|
|
- Remove the step-by-step motor (7) and weaken the hinge of a steering shaft (9) do not assort the hinge.
|
- Turn out bolts (10) fastenings of assembly of pedals to assembly of a steering column and separate the socket (11) of the sensor of provision of a pedal of a brake.
- Unhook from a pedal a returnable spring (12), remove a lock ring and take an axis of a pedal (13).
- Remove pedal assembly.
- Installation is made upside-down.
|
|
|
|