Saab 9-5

since 1997 of release

Repair and car operation


Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
- Brake system
   General information and security measures
   Pumping of brake system and replacement of brake liquid
   Replacement of brake shoes
   Removal and installation of brake disks
   Removal and installation of brake supports
   Removal and installation of a pedal of a brake
   Removal and installation of the vacuum pump
   Removal and installation of the tank of brake liquid and GTTs
   Removal and installation of brake lines
   Removal and installation of components of the parking brake and its drive
   Removal and installation of components of auxiliary systems (ABS/TC/ESP)
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Removal and installation of brake lines

Vacuum tube with the vacuum amplifier

 PERFORMANCE ORDER

  1. Remove the top cover of the engine.
  1. Remove a hose from a delivery air tube, from the inlet pipeline and from the vacuum block.
  1. Connect a new hose.

Brake hoses

Below the description of replacement of a brake hose of the left forward wheel is provided. Replacement of other hoses is made similarly.


 PERFORMANCE ORDER

  1. To Poddomkratta the car also remove the corresponding wheel.
  1. Disconnect a hose from a support and from a tube (3). To Zakuporta open end of a brake tube.
  1. Weaken collars (5) and remove a hose.
  2. Installation is made upside-down. Watch, that the hose did not concern details surrounding it at wheel turn. Besides, the hose should not be overwound.
  3. In conclusion of installation pump over a hydraulic actuator of brake system.

Brake tubes

 PERFORMANCE ORDER

  1. Clear connections of a replaced tube and give them. To Zakuporta open connections that dirt did not get to them.
  1. Clear a new tube the compressed air and establish it.
  2. Pump over a hydraulic actuator of brake system.