Saab 9-5

since 1997 of release

Repair and car operation



Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
- Settings and routine maintenance of the car
   General information
   General information about settings and adjustments
   Schedule of routine maintenance
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure of their rating
   Replacement of impellent oil and oil filter
   Check of effort of a tightening of fixture of elements of a suspension bracket
   Adjustment of headlights
   Check of brake system
   Replacement of brake liquid, pumping of brake system
   Check of a condition of the battery and care of it
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of CV JOINTS of power shafts
   Check of a condition of system of production of the fulfilled gases
   Check of a condition and replacement of hoses and tubes in an impellent compartment, localization of leaks
   Check of a condition and tension of a belt of a drive of auxiliary units
   Check and replacement of the salonny filter of a heater and To/in
   Service of locks and loops
   Check of elements of systems of safety
   Replacement of a filtering element of an air purifier
   Check and replacement of spark plugs and ignition module
   Replacement of the fuel filter
   AT liquid replacement
   Condition check, adjustment and replacement of brushes of screen wipers
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Check and replacement of the salonny filter of a heater and To/in

To replace the salonny filter follows regularly. It will provide the maximum return of systems of heating and К/В.


 PERFORMANCE ORDER

  1. Remove a ware box (see. Head the Body), give fixture and uncover the salonny filter.

Do not damage thermostat electroconducting.

  1. Remove filtering element; on early models remove also his holder.
  1. Check consolidation existence in the top part of a casing of the filter, if necessary paste consolidation (shooters show the direction of a stream of air).
  1. On models with To/in, established vneshtatno, break off two plastic ears on the top party of the filter.
  2. Establish the filter as directed on the top part of its casing.
  3. At installation watch, that the cover was densely closed for the purpose of prevention of course of condensate.
  4. Establish a ware box.