Saab 9-5

since 1997 of release

Repair and car operation

Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
- Settings and routine maintenance of the car
   General information
   General information about settings and adjustments
   Schedule of routine maintenance
   Check of levels of liquids, control of leaks
   Check of a condition of tires and pressure of their rating
   Replacement of impellent oil and oil filter
   Check of effort of a tightening of fixture of elements of a suspension bracket
   Adjustment of headlights
   Check of brake system
   Replacement of brake liquid, pumping of brake system
   Check of a condition of the battery and care of it
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of CV JOINTS of power shafts
   Check of a condition of system of production of the fulfilled gases
   Check of a condition and replacement of hoses and tubes in an impellent compartment, localization of leaks
   Check of a condition and tension of a belt of a drive of auxiliary units
   Check and replacement of the salonny filter of a heater and To/in
   Service of locks and loops
   Check of elements of systems of safety
   Replacement of a filtering element of an air purifier
   Check and replacement of spark plugs and ignition module
   Replacement of the fuel filter
   AT liquid replacement
   Condition check, adjustment and replacement of brushes of screen wipers
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Check of a condition of protective covers of CV JOINTS of power shafts

Protective covers of power shafts are very important elements since they protect hinges of equal angular speeds (CV JOINT) from hit on them of dirt, water and other foreign matters causing damages. External pollution of protective covers by oil and greasings can lead to premature failure of a material of covers therefore it is recommended to wash periodically covers with water with soap.

PERFORMANCE ORDER

Examine covers on existence of gaps and cracks, and also the weakened collars. In case of detection of signs of cracks or leakage of greasing the cover should be replaced.

At the same time check the general condition of CV JOINTS, holding a shaft and at the same time trying to turn a wheel. Repeat attempt, holding the internal CV JOINT and turning a shaft. Any appreciable люфт points to wear of the hinge, wear in grooves of a shaft or weakening of a lock nut of a shaft.