Saab 9-5

since 1997 of release

Repair and car operation



Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
- Power supply system and production of the fulfilled gases
   General information and security measures
   Sbrasyvaniye of pressure in fuel system
   - Power supply system of petrol engines
      Principle of functioning of a control system of fuel injection
      Removal and installation of a sleeve of an air inlet and case of the air filter
      Removal and installation of sensors MAF, MAP, IAT and sensor of temperature/pressure of air of pressurization
      Removal and installation of a tube of forced air
      Removal and installation of the case of a throttle
      Removal and installation of the control valve of forced air
      Removal and installation of the perepuskny valve of a turbokompressor
      Removal and turbokompressor installation
      Removal and installation of an interkuler
      Removal and installation of a pedal of gas, adjustment of a cable of a drive of a butterfly valve
      Removal and installation of a fuel tank
      Replacement of the fuel filter
      Removal and installation of assembly of the fuel pump and sensor of a stock of fuel
      Removal and installation of the fuel distributive highway and injectors
      Removal and installation of a regulator of pressure of fuel
   + Power supply system of the diesel V6 engine
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Removal and installation of a fuel tank

 PERFORMANCE ORDER

  1. Lift a pillow of a back seat and unbend a sexual covering (1 on an illustration).
  1. Uncover (2 on an illustration) the fuel pump and separate the top socket (3).

Do not separate the socket on the pump.

  1. Empty a fuel tank.
  2. Disconnect from the pump fuel hoses, having paid attention to their color and connection places.

The pressure head hose (white color) is connected to the union with «PRESSURE» inscription on the pump; a hose of black color – returnable.

  1. To Poddomkratta the car also remove back section of an exhaust pipe.
  1. By means of the special adaptation separate a purge tube.
  1. Turn out a plastic bolt of a tube of a jellied mouth and disconnect from it hoses.
  1. Disconnect both cables of a drive of the parking brake from the lever.
  1. Establish under a fuel tank a jack, turn out forward bolts of fastening of collars of a fuel tank, lower it and deduce from under the car.
  1. Installation is made upside-down. It is recommended to replace rubber hoses between a tube of a jellied mouth and a fuel tank, and also a plastic bolt of fastening of this tube. If necessary replace sealing rings of connections of fuel hoses with the fuel pump.