Saab 9-5

since 1997 of release

Repair and car operation


Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
- Power supply system and production of the fulfilled gases
   General information and security measures
   Sbrasyvaniye of pressure in fuel system
   - Power supply system of petrol engines
      Principle of functioning of a control system of fuel injection
      Removal and installation of a sleeve of an air inlet and case of the air filter
      Removal and installation of sensors MAF, MAP, IAT and sensor of temperature/pressure of air of pressurization
      Removal and installation of a tube of forced air
      Removal and installation of the case of a throttle
      Removal and installation of the control valve of forced air
      Removal and installation of the perepuskny valve of a turbokompressor
      Removal and turbokompressor installation
      Removal and installation of an interkuler
      Removal and installation of a pedal of gas, adjustment of a cable of a drive of a butterfly valve
      Removal and installation of a fuel tank
      Replacement of the fuel filter
      Removal and installation of assembly of the fuel pump and sensor of a stock of fuel
      Removal and installation of the fuel distributive highway and injectors
      Removal and installation of a regulator of pressure of fuel
   + Power supply system of the diesel V6 engine
   + Systems of release and decrease in toxicity of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Removal and installation of a sleeve of an air inlet and case of the air filter

 PERFORMANCE ORDER

  1. Remove a decorative reshyotka of a radiator and the right block headlight (see. Heads Body and Onboard electric equipment).
  1. Remove an air inlet arm.
  1. Disconnect an air line from an air purifier (3 on сопр. illustrations), поддомкратьте the car also disconnect from an air purifier an air inlet (5).
  1. Remove the bottom forward protective casing, weaken the bottom fixture (7 on an illustration) cases of an air purifier and lower it.
  1. Remove the bottom section of a fairing (8 on an illustration) and remove an air inlet, having extended it down.
  2. Installation is made as it should be, the return sequence of dismantle of components.