Saab 9-5
since 1997 of release
Repair and car operation
Saab 9-5
+
Saab 9-5 Cars
+
Governing bodies and operation receptions
+
Settings and routine maintenance of the car
+
Engine
+
Systems of cooling of the engine, heating, ventilation and air conditioning
-
Power supply system and production of the fulfilled gases
General information and security measures
Sbrasyvaniye of pressure in fuel system
-
Power supply system of petrol engines
Principle of functioning of a control system of fuel injection
Removal and installation of a sleeve of an air inlet and case of the air filter
Removal and installation of sensors MAF, MAP, IAT and sensor of temperature/pressure of air of pressurization
Removal and installation of a tube of forced air
Removal and installation of the case of a throttle
Removal and installation of the control valve of forced air
Removal and installation of the perepuskny valve of a turbokompressor
Removal and turbokompressor installation
Removal and installation of an interkuler
Removal and installation of a pedal of gas, adjustment of a cable of a drive of a butterfly valve
Removal and installation of a fuel tank
Replacement of the fuel filter
Removal and installation of assembly of the fuel pump and sensor of a stock of fuel
Removal and installation of the fuel distributive highway and injectors
Removal and installation of a regulator of pressure of fuel
+
Power supply system of the diesel V6 engine
+
Systems of release and decrease in toxicity of the fulfilled gases
+
Systems of electric equipment of the engine
+
Manual box of gear shifting
+
Automatic transmission
+
Coupling and power shafts
+
Brake system
+
Suspension bracket and steering
+
Body
+
Onboard electric equipment
Removal and installation of the control valve of forced air
PERFORMANCE ORDER
Remove a protective rubber casing and separate the valve socket (1 on an illustration).
Mark hoses and disconnect them from the valve, then from an arm.
Installation is made upside-down, do not mix a place of connection of hoses.